Because the water jet loom uses water flow weft insertion, there are certain requirements for the hydrophobicity of the weft fiber and the thickness of the fiber. It is required that the warp and weft fibers have good hydrophobicity, such as polyester filament, nylon filament and other synthetic fiber filaments; the linear density of the fiber is relatively suitable between 33 and 500 dtex, and the fiber is too thick due to insufficient water weft insertion force. Difficult to weave.
According to the characteristics of the water jet loom, it is suitable for weaving the fiber raw materials to be used, which is superior to other weaving machines, regardless of product yield, quality and weaving efficiency. Because the water jet loom is a light silk weaving machine, the adaptability of the variety is limited, and it is generally adapted to weave light-weight or medium-sized silk fabrics. Weaving heavy and heavy fabrics is difficult. If weaving thick and heavy fabrics, the relevant equipment of water jet loom should be modified accordingly. At present, domestic water jet loom manufacturers have accumulated some experience in weaving medium thick fabrics and twisted silk products. It is also a development of the adaptability of water jet loom.
